manualshive.com logo in svg

HP ProCurve 530 NA, Management And Configuration Manual

Share
Download
HP ProCurve 530 NA Management And Configuration Manual Download Page 547

D-31

Open Source Licenses

OpenSSL

LICENSE ISSUES
===============

The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License 
and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually 
both licenses are BSD-style Open Source licenses. In case of any license issues related to 
OpenSSL please contact [email protected].

OpenSSL License
--------------------------

==================================================================== 

Copyright (c) 1998-2004 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:

1.Redistributions of source code must retain the above copyright notice, this list of conditions and 
the following disclaimer. 

2.Redistributions in binary form must reproduce the above copyright notice, this list of conditions 
and the following disclaimer in the documentation and/or other materials provided with the 
distribution.

3.All advertising materials mentioning features or use of this software must display the following 
acknowledgment: "This product includes software developed by the OpenSSL Project for use in 
the OpenSSL Toolkit. (http://www.openssl.org/)"

4.The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote 
products derived from this software without prior written permission. For written permission, please 
contact [email protected].

5.Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in 
their names without prior written permission of the OpenSSL Project.

6.Redistributions of any form whatsoever must retain the following acknowledgment:"This product 
includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://
www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED 
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 
NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY 
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 

Summary of Contents for ProCurve 530 NA













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands