manualshive.com logo in svg

HP ProCurve 530 NA, Management And Configuration Manual

Share
Download
HP ProCurve 530 NA Management And Configuration Manual Download Page 116

5-32

General System Configuration

Configuring SNMP

Web: Configuring SNMP v1 and v2c Traps

The SNMP – Traps and SNMP – Trap Hosts screens configure SNMP v1 and 
v2c trap notifications that can be sent to specified management stations.

SNMP Traps

The SNMP – Traps screen controls whether specific SNMP notifications are 
sent:

■

System Traps: 

pertaining to the system.

•

hpWlanSystemUp

 – This notification is sent when the access point 

is fully up and running. 

•

hpWlanSystemDown

 – This notification is sent before the access 

point is about to reboot.

•

hpWlanMgmtAccessUpdate

 – This notification is sent when system 

management access is set to Enable/Disable.

•

hpWlanButtonUpdate

 – This notification is sent when the RESET 

and CLEAR button functions are set to Enable/Disable.

•

hpWlanSystemFWUpgradeStatus 

– This trap contains information 

about the current status of firmware upgrade. The IP address is the 
file server's IP address.

•

hpWlanSystemConfigFileTransfer 

– This trap contains informa-

tion about the file name, server address and direction of configuration 
file. The IP address is the file server's IP address. 

■

AP Traps: 

pertaining to the access point.

•

hpWlanApInterfaceUpdate

 - This notification is sent out when the 

Ethernet or 802.11 wireless (radio) interface is enabled or disabled.

•

hpWlanApSSIDUpdate

 – This notification is sent out when an SSID 

is enabled or disabled.

•

hpWlanClientAssociation

– This notification is sent when a station 

successfully associates with the access point. The notification value 
includes the MAC address of the associated station. 

•

hpWlanClientReAssociation 

– This notification is sent when a 

station successfully re-associates with the access point. The notifica-
tion value includes the MAC address of the re-associated station. 

•

hpWlanClientAuthentication

 – This notification is sent when a 

station successfully authenticates with the access point. The notifica-
tion value includes the MAC address of the authenticated station.

•

hpWlanClientDeauthentication

 – This notification is sent when a 

station successfully authenticates with the access point. The notifica-
tion value includes the MAC address of the authenticated station.

Summary of Contents for ProCurve 530 NA













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands