manualshive.com logo in svg

HP ProCurve 530 NA, Management And Configuration Manual

Share
Download
HP ProCurve 530 NA Management And Configuration Manual Download Page 222

7-28

Wireless Security Configuration

Manual Configuration Using the CLI

The following commands set the security to a shared-key authentication 
protocol.

N o t e

Supported authentications are: Open System, Shared Key, or both.

C a u t i o n

Shared Key mode is seriously flawed, in that it uses the static WEP encryption 
key (transmitted openly) for station authentication. This allows the WEP 
encryption key to be easily discovered by anyone who might eavesdrop on the 
wireless network. If static WEP is configured, it is recommended that you 
select Open System authentication. 

Using the CLI to Configure Dynamic WEP.  

The following example 

shows how to configure a WLAN (BSS/SSID) interface to use Dynamic WEP 
as the security mode, configure an external authentication server, and set the 
RADIUS key (the RADIUS key is automatically provided if you are using the 
built-in authentication server).

N o t e

Supported authentication servers are the built-in authentication server on the 
access point or an external RADIUS server. The RADIUS key value is used 
with an external RADIUS server only and is ignored for the internal RADIUS 
server. It should be set to the shared secret key that is configured on the 
external RADIUS server.

ProCurve Access Point 530(radio1-wlan1)#wep-key-1 abcde 

ProCurve Access Point 530(radio1-wlan1)#wep-key-2 fghi 

ProCurve Access Point 530(radio1-wlan1)#wep-key-3 klmn 

ProCurve Access Point 530(radio1-wlan1)#wep-key-4 pqrs

ProCurve Access Point 530(radio1-wlan)#

ProCurve Access Point 530(radio1-wlan1)#shared-key-auth 

ProCurve Access Point 530(radio1-wlan1)#no open-system-auth

ProCurve Access Point 530(radio1-wlan1)#

Summary of Contents for ProCurve 530 NA













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands