manualshive.com logo in svg

HP ProCurve 530 NA, Management And Configuration Manual

Share
Download
HP ProCurve 530 NA Management And Configuration Manual Download Page 483

A-9

File Uploads, Downloads, and Resets

Transferring Configuration Files

•

[Update]: 

Updates the system with the specified parameters and 

performs any requested actions.

■

Reset Configuration: 

Parameters and actions needed to reset a config-

uration.

•

[Reset to Factory Default]: 

Resets the AP to original settings.

•

[Reset to Custom Default]: 

Resets the AP to the saved custom 

config file.

Figure A-2. Configuration Files Tab

To Save A Running Configuration:  

1.

Select Management> System Maintenance > Configuration Files tab.

2.

To save the current running configuration, click 

[Save] 

to save the file as a 

custom default configuration file.

To Transfer A Configuration File:  

1.

Select Management> System Maintenance > Configuration Files tab.

2.

Select 

FTP, TFTP, or SCP 

for the Server Type option.

3.

Select

 Download or Upload 

for the Direction option.

Summary of Contents for ProCurve 530 NA













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands