HP ProCurve 530 NA, Management And Configuration Manual

Page: 216 / 556

7-22
Wireless Security Configuration
Establishing Security
Figure 7-3. Configuring WPA-PSK
To Configure WPA-PSK:
1. Select WLANs.
2. Click
[Edit]
after the selected WLAN. The WLAN Configuration Security
pop-up window opens, displaying the Security tab.
3. Select WPA-PSK from the Security Mode drop-down.
4. Select WPA, WPA2, or Both for WPA support, as required.
5. Select Enable pre-authentication if you selected WPA2 or Both for the
WPA version.
6. Select TPIK (recommended), AES, or Both to enable the type of Cipher
encryption.
7. For the key
,
enter between 8 and 63 alphanumeric characters. (Be sure
that all wireless stations use the same key.)
8. Select
[Update]
to set the WPA-PSK security parameters.