manualshive.com logo in svg

HP ProCurve 530 NA, Management And Configuration Manual

Share
Download
HP ProCurve 530 NA Management And Configuration Manual Download Page 205

7-11

Wireless Security Configuration

Wireless Security Overview

TKIP with 802.1X

The TKIP with 802.1X security profile uses TKIP as the encryption cipher and 
802.1X as the authentication mechanism. In this way, each station uses a 
unique master key to derive the encryption between the access point and the 
station.

AES

 with 802.1X

The AES with 802.1X security profile uses AES as the encryption cipher and 
802.1X as the authentication mechanism. In this way, each station is assigned 
a unique master key to derive the encryption between the access point and 
the station, and the encryption keys can be automatically and periodically 
changed to further reduce the risk of their discovery.

Summary of Contents for ProCurve 530 NA













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands