Figure 49 Configuration > Network Management page
You can change:
•
SNMP Enabled — When checked, the device can be managed by computers listed in the
SNMP Target IP Addresses field.
•
SNMP Target IP Addresses — the IP addresses for up to three computers running IPv4
SNMP management software and up to three computers running IPv6 SNMP management
software. IP addresses will not be cleared if SNMP is disabled, but those targets will no
longer be able to manage the library and will not receive traps from the library. You can
select the SNMP version for each target address.
•
Community Name — a string used to match the SNMP management station and device. It
must be set to the same name on both the management station and the library. The default
community name is
public
.
76
Operating the tape library
