3.
By using
Previous
or
Next
, you can select from the following information screens:
•
Serial number
•
Drive type
•
Firmware revision
•
SCSI ID (parallel SCSI tape drives only)
For a Fibre Channel tape drive, you can also select from the following information screens:
•
The WWide Node Name for the FC node to which the tape drive is connected.
•
The WWide Port Name and Port Type for Port A.
•
The WWide Port Name and Port Type for Port B.
World Wide names are assigned automatically; they cannot be configured.
Component status (Status/Information > Component Status)
To obtain component status:
1.
From the Home screen, press
Previous
or
Next
until the screen displays
Status/Information
.
Press
Enter
to select.
2.
Press
Previous
or
Next
until the screen displays
Component Status
. Press
Enter
to select.
3.
By using
Previous
or
Next
, you can select from the following information screens:
•
Drive activity
•
Library status
•
Drives status
•
Fan status
The second line of the screen will display one of the following:
•
Good — the component is operating normally.
•
Warning — the component might have an issue that should be addressed. The device
is functional.
•
Critical — the component has an error condition that should be addressed. The device
might not be fully functional.
•
Failed — the component has a known failure and should be replaced.
Network information (Status/Information > Network Information)
To access network settings for the device:
1.
From the Home screen, press
Previous
or
Next
until the screen displays
Status/Information
.
Press
Enter
to select.
2.
Press
Previous
or
Next
until the screen displays
Network Information
. Press
Enter
to
select.
3.
Press
Previous
or
Next
to access the following information:
•
IPv4 Network Enabled or Disabled
•
IPv6 Network Enabled or Disabled
•
Host Name
•
Domain Name
•
MAC Address
Using the MSL2024 OCP
95
