HP MSL8096, User And Service Manual

Page: 94 / 220

3. By using Previous or Next , you can select from the following inventory locations:
•
Mailslot
•
Left magazine
•
Right magazine
•
Drive 1
•
Drive 2 (if two drives are present)
4. To view the inventory of a magazine, press Enter when the OCP displays Left or Right
Magazine . The OCP will display the contents of the lowest numbered slot in the magazine.
The display will show the tape bar code number, Full , or Empty .
5. Use Previous or Next to scroll through the remaining slots in the magazine. Press Cancel
to choose another inventory location.
6. To view the inventory of a tape drive, press Previous or Next until the screen displays Drive
1 , or Drive 2 . The display will show the tape bar code number, Full , or Empty . Press Enter
to view the source of the tape loaded in the drive. For example, Drive 1 Tape Source = Slot
2 , indicates that the tape in Drive 1 was loaded from slot 2.
Library information (Status/Information> Library Information)
To obtain information about your device:
1.
From the Home screen press Previous or Next until the screen displays Status/Information .
Press Enter to select.
2. Press Previous or Next until the screen displays Library Information . Press Enter to select.
By using Previous or Next , you can select from the following information screens:
•
Library Time
•
Firmware rev.
•
Product ID
•
Serial number
•
SCSI ID and LUN (SCSI devices only)
•
Slots and Mailslots
•
Master drive
•
Odometer
•
Power On Time
•
WWide Node Name for the FC node to which the library is connected. (Fibre Channel
devices only)
Drive information (Status/Information > Drive Information)
To obtain drive information:
1.
From the Home screen, press Previous or Next until the screen displays Status/Information .
Press Enter to select.
2. Press Previous or Next until the screen displays Drive 1 Information or Drive 2 Information .
Press Enter to select.
94 Operating the tape library