Regulatory specifications
Table 50 CSA test conditions
Tested condition or value
Characteristic
Stationary (rack-mount or desk-top)
Equipment mobility
Pluggable — Type A
Connection to the mains
Continuous
Operating condition
Operator accessible
Access location
OVC II
Over voltage category (OVC)
-10%, +6%
Mains supply tolerance (%) or absolute
mains supply values
No
Tested for IT power systems
N/A
IT testing, phase-phase voltage (V)
Class I
Class of equipment
20 A (branch circuit protection)
Considered current rating (A)
PD 2
Pollution degree (PD)
IPX0
IP protection class
Max 2000
Altitude during operation (m)
38
Altitude of test laboratory (m)
Max 25 kg
Mass of equipment (kg)
40 °C
Manufacturer's Declared Ambient (°C)
NOTE:
The CSA test conditions might differ from the product specification limits.
Default and restore defaults settings
You can save the library configuration settings to a file, restore the settings, or reset the library
configuration to the default settings.
“Default settings” (page 207)
lists the library configuration
parameters, with their default settings and whether they are reset to default or saved to a file.
Table 51 Default settings
Stored in Saved Config
file
Reset by Set Defaults
Default setting
Parameter
Tape drive settings
Yes
Yes
SCSI drive
address
•
MSL2024: A full-height tape drive
has SCSI ID 4. The bottom
half-height tape drive has SCSI ID 4
and the top drive has SCSI ID 5.
•
MSL4048: All full-height tape drives
have SCSI ID 4. Half-height drive
slots have SCSI ID of 4, 5, 4, 5 from
the bottom up.
•
MSL8048 and MSL8096: All tape
drives have SCSI ID 4.
Yes
Yes
Automatic speed, auto port type
FC drive
configuration
Regulatory specifications
207
