Figure 4 OCP LEDs
Ready
. Illuminated when power is on. Blinking when there is tape drive or robotics activity.
Green
1.
Clean
. Illuminated when the tape drive has determined that a cleaning cartridge should be used.
Cleaning is only necessary when the device directs you to do so. Additional cleaning is not
necessary.
Amber
2.
Attention
. Illuminated if the device has detected a condition that requires attention by the operator.
Amber
3.
Error
. Illuminated if an unrecoverable error occurs. A corresponding error message displays on
the LCD screen. For more information, see
Troubleshooting (page 132)
.
Amber
4.
For MSL2024 OCP functions, see
“Using the MSL2024 OCP” (page 88)
.
For MSL4048, MSL8048, and MSL8096 OCP functions, see
“Using the MSL4048, MSL8048,
and MSL8096 OCP” (page 112)
.
Back panel
The back panel provides access to the drive interface connectors, the tape drive, the power
connector, the Ethernet, serial and USB ports, and the magazine release holes as shown in
Figure 5 (page 10)
Figure 5 MSL2024 back panel overview
2. Fan
1. Tape drive assembly
4. Magazine release hole
3. Power connector
6. Ethernet port
5. Pull-out tab containing the serial number and other
product information
8. Controller health status indicator
7. Serial port (Factory use only)
9. USB port
10
Features
