manualshive.com logo in svg

HP MSL8096, User And Service Manual

The HP MSL8096 is a high-performance and reliable tape library designed for efficient data backup and archiving. You can easily access its detailed specifications, configuration guidelines, and operating instructions by downloading the Quickspecs and user manual for free from our website.

Share
Download
background image

moved into any logical library. If sharing the mailslot among logical libraries is an issue in your
environment or is not supported by your backup application, disable the mailslot.

Each logical library has a unique serial number and World Wide Identifier (WWID), which can be
found in the RMI

Identity > Library

screen. For more information on WWIDs, see

“World Wide

identifiers” (page 24)

.

NOTE:

Libraries that require a license to enable all slots must have all slots licensed to operate

with the Library Extender.

Partitioning the MSL2024 and MSL8048 Tape Libraries

An MSL2024 tape library with two tape drives can be configured into two logical libraries. Each
logical library is assigned one tape drive and one magazine.

An MSL8048 with at least two tape drives can be configured into two logical libraries. Each logical
library is assigned at least one tape drive and two magazines.

Table 2 MSL2024 and MSL8048 Tape Libraries partitioned into two logical libraries

Magazines

Tape drives

MSL2024

MSL8048

1. Logical library 1 tape drives and magazines

2. Logical library 2 tape drives and magazines

Partitioning the MSL4048 and MSL8096 Tape Libraries

The MSL4048 and MSL8096 Tape Libraries can be configured into two to four logical libraries,
depending on the number of tape drives installed. The MSL4048 supports up to two full-height
tape drives or up to four half-height tape drives. The MSL8096 supports up to four half-height or
full-height tape drives. For the tape drives and magazines assigned to each logical library see:

•

“MSL4048 and MSL8096 Tape Libraries partitioned into two logical libraries” (page 20)

•

“MSL4048 and MSL8096 tape libraries partitioned into three logical libraries” (page 20)

•

“MSL4048 and MSL8096 Tape Libraries partitioned into four logical libraries” (page 21)

Each logical library includes the tape drives in specific drive locations. You might need to move
a tape drive if there is not a tape drive in the top half of the library. If the library only has two tape
drives installed in the bottom two drive bays, move one tape drive to the top half of the library.
Power off the tape drive from the RMI

Configuration > Drive

screen before moving the tape

Logical libraries

19

Summary of Contents for MSL8096





























































































































































































































Reviews:

No comments

Related manuals for MSL8096

IBM 8275-416 Quick Reference Card preview
8275-416
Brand: IBM Pages: 8
QNAP TS-1273U User Manual preview
TS-1273U
Brand: QNAP Pages: 62
QNAP HS-210 Hardware User Manual preview
HS-210
Brand: QNAP Pages: 130
IBM CISCO MDS 9124 - UPDATE FOR SYSTEM STORAGE Update Manual preview
CISCO MDS 9124 - UPDATE FOR SYSTEM STORAGE
Brand: IBM Pages: 37
Rocsecure ROCBIT 2 Instruction Manual preview
ROCBIT 2
Brand: Rocsecure Pages: 10
U-Line H-6405 Assembly Instructions Manual preview
H-6405
Brand: U-Line Pages: 6
Asgard VANGARD Assembly Instructions preview
VANGARD
Brand: Asgard Pages: 3
MCE Technologies Xcaret Pro-99 Installation Manual preview
Xcaret Pro-99
Brand: MCE Technologies Pages: 9
Seagate ST3000VN0001 Product Manual preview
ST3000VN0001
Brand: Seagate Pages: 27
IBM DBCA-203240 Specifications preview
DBCA-203240
Brand: IBM Pages: 190
Conrad 417620 Operating Instructions preview
417620
Brand: Conrad Pages: 4
garofalo URBAN 100.1P DEC User Manual preview
URBAN 100.1P DEC
Brand: garofalo Pages: 16
Qsan XCubeNAS XN3002T Quick Installation Manual preview
XCubeNAS XN3002T
Brand: Qsan Pages: 12
Fujitsu PRIMERGY SX910 S1 Operating Manual preview
PRIMERGY SX910 S1
Brand: Fujitsu Pages: 46
Fujitsu PRIMERGY PG-DTA101 User Manual preview
PRIMERGY PG-DTA101
Brand: Fujitsu Pages: 70
Fujitsu SLR 100 GBYTE Operating Manual preview
SLR 100 GBYTE
Brand: Fujitsu Pages: 21
Fujitsu PRIMERGY LTO3 User Manual preview
PRIMERGY LTO3
Brand: Fujitsu Pages: 92
Fujitsu Streamer DAT 160 User Manual preview
Streamer DAT 160
Brand: Fujitsu Pages: 41

Brands by name

Popular brands

Load more brands