manualshive.com logo in svg

HP MSL8096, User And Service Manual

The HP MSL8096 is a high-performance and reliable tape library designed for efficient data backup and archiving. You can easily access its detailed specifications, configuration guidelines, and operating instructions by downloading the Quickspecs and user manual for free from our website.

Share
Download
background image

Setting and changing the administrator password (Configuration> Set Admin Password)....124
Restore defaults (Configuration > Restore Defaults).............................................................124
Setting the library date and time (Configuration > Set Date and Time)..................................126
Saving and restoring the library configuration (Configuration> Save/Restore)......................126

Operations menu.........................................................................................................................126

Opening the mailslot (Operations > Open Mailslot)...............................................................126
Unlocking, removing and replacing magazines (Operations > Unlock Left/Right
Magazines..............................................................................................................................127
Moving Media (Operations > Move Media)............................................................................127
Performing Inventory (Operations > Inventory)......................................................................128
Enabling Password Locks (Operations > Enable Password Locks)......................................128

Support menu..............................................................................................................................128

Powering drives on and off (Support > Power on/off Drives).................................................128
Cleaning the tape drive (Support > Clean Drive)...................................................................128
Running tests (Support > Run Tests).....................................................................................129
Viewing logs (Support > View Logs)......................................................................................129
Updating library and drive firmware (Support > FW Upgrade)...............................................129

Using a USB flash drive to upgrade firmware (Support > FW Upgrade> By USB)...........129
Using Library & Tape Tools (L&TT) to update library and drive firmware.........................130
Using a firmware upgrade tape to update drive firmware (Support> FW Upgrade > By
Tape).................................................................................................................................130

Force ejecting a drive (Support > Force Drive Eject).............................................................130
Downloading a support ticket (Support > Support Ticket)......................................................130
Rebooting the tape library (Support > Reboot)......................................................................131

5 Troubleshooting...............................................................................................132

Fibre Channel connection problems.................................................................................................132
Detection problems after installing a SAS drive...............................................................................132
Detection problems after installing a parallel SCSI drive..................................................................134
Operation problems..........................................................................................................................138
Performance problems.....................................................................................................................143

Average file size..........................................................................................................................144
File storage system ....................................................................................................................144
Connection from the backup server to the disk array..................................................................144
Backup/archive server.................................................................................................................144
Backup/archive software and method.........................................................................................145
Connection from the archive/backup host server to the library...................................................145
Data cartridges............................................................................................................................145

Service and repair.............................................................................................................................145

Releasing the magazines manually.............................................................................................145

The wellness test..............................................................................................................................146
Error codes.......................................................................................................................................149

Finding error code information on the MSL2024 OCP................................................................149
Finding error code information on the MSL4048, MSL8048, and MSL8096 OCP......................150
Finding error code information on the RMI..................................................................................150
Finding error code information on an L&TT support ticket or report............................................151
Main error code descriptions.......................................................................................................154
Error sub-code descriptions........................................................................................................166
Drive error codes.........................................................................................................................174

Warning events.................................................................................................................................175
Configuration change events............................................................................................................181
Information events............................................................................................................................182
Using Library & Tape Tools to diagnose problems...........................................................................183

6 Upgrading and servicing the tape library.........................................................185

Possible tools needed.......................................................................................................................185

6

Contents

Summary of Contents for MSL8096





























































































































































































































Reviews:

No comments

Related manuals for MSL8096

M-system AB2 Instruction Manual preview
AB2
Brand: M-system Pages: 3
Samsung Spinpiont HD320KJ Installation Manual preview
Spinpiont HD320KJ
Brand: Samsung Pages: 1
Seagate ST12000NM000J Product Manual preview
ST12000NM000J
Brand: Seagate Pages: 57
Asgard VANGARD Assembly Instructions preview
VANGARD
Brand: Asgard Pages: 3
Yardmaster 54 PEZ Silver Assembly Instructions Manual preview
54 PEZ Silver
Brand: Yardmaster Pages: 16
Riverlea Duratuf KIWI KS3 Assembly Instructions Manual preview
Duratuf KIWI KS3
Brand: Riverlea Pages: 18
Olixir 3DX 120GB Specifications preview
3DX 120GB
Brand: Olixir Pages: 2
Sans Digital Mobileraid MR8X Detailed User'S Manual preview
Mobileraid MR8X
Brand: Sans Digital Pages: 81
kioxia EXCERIA G2 Quick Start Manual preview
EXCERIA G2
Brand: kioxia Pages: 24
Konig CMP-MOBSTOR120 User Manual preview
CMP-MOBSTOR120
Brand: Konig Pages: 33
NetApp AltaVault System Installation And Setup Instructions preview
AltaVault System
Brand: NetApp Pages: 2
morse 285XGR Operator'S Manual preview
285XGR
Brand: morse Pages: 7
Lenovo IBM Half-high LTO Generation 3 Product Manual preview
IBM Half-high LTO Generation 3
Brand: Lenovo Pages: 13
Lenovo F800 User Manual preview
F800
Brand: Lenovo Pages: 37
Lenovo Beacon Hardware Maintenance Manual preview
Beacon
Brand: Lenovo Pages: 46
Lenovo S3500 Product Manual preview
S3500
Brand: Lenovo Pages: 20
Lenovo IBM Storwize V7000 Product Manual preview
IBM Storwize V7000
Brand: Lenovo Pages: 30
Lenovo EMC2 px4-400r Quick Start Manual preview
EMC2 px4-400r
Brand: Lenovo Pages: 56

Brands by name

Popular brands

Load more brands