ENWW
Using the Embedded Web Server 114
Wizard
Note
If you use HP Web Jetadmin to manage your
devices, you should not use this wizard. Instead, use
HP Web Jetadmin to configure your network
security settings to ensure they are properly set for
your network.
The
Wizard
page allows you to run the
HP Jetdirect Security
Configuration Wizard
. This wizard will guide you through the print
server’s security configuration needed for your network. Click
Start
Wizard
to run the wizard. This opens the
Security Level
page.
The optional configuration parameters presented by the wizard
will depend on your choice of security level. For an overview,
see
Table 4.7
.
Note
If you improperly exit the wizard (for example, by
failing to use the Cancel button), an
Operation
Failed
screen may appear. If so, wait approximately
two minutes before entering the wizard again.
Restore Defaults
This page is used to restore security configuration settings to factory
defaults. The default settings displayed depend on the features
supported by the print server.
Only the security settings listed are restored to factory defaults,
other configuration settings are not affected.