ENWW
Configuring for LPD Printing 142
LPD on Windows NT/2000/Server 2003
Systems
This section describes how to configure Windows NT/2000 networks
to use the HP Jetdirect LPD (Line Printer Daemon) services.
The process consists of two parts:
●
Installing TCP/IP software (if not already installed).
●
Configuring a network LPD printer.
Installing TCP/IP Software
This procedure lets you check whether you have TCP/IP installed
on your Windows NT system, and to install the software if
necessary.
Note
You may need your Windows System distribution
files or CD-ROMs to install TCP/IP components.
1. To check whether you have Microsoft TCP/IP Printing protocol
and TCP/IP printing support:
■
Windows 2000/Server 2003—
Windows 2000: Click
Start
,
Settings
,
Control Panel
. Then
double-click the
Network and Dial-up Connections
folder.
Double-click the
Local Area Connection
for your network
and click
Properties
.
Server 2003: Click
Start
,
All Programs, Accessories,
Communications
, and open the
Network Connections
folder. Double-click the
Local Area Connection
for your
network and click
Properties
.
If Internet Protocol (TCP/IP) is listed and enabled in the list
of components used by this connection, the necessary software
is already installed. (Proceed to “
Configuring a Network
Printer for Windows 2000/Server 2003 Systems
”). If not, go to
step 2.
■
NT 4.0—Click
Start
,
Settings
,
Control Panel
. Then
double-click the
Network
option to display the
Network
dialog box.