ENWW
TCP/IP Configuration 60
c.
You must now provide the IP address of the WINS server
by doing the following:
●
Select
Value
, then
Edit Array
.
●
From the IP Address Array Editor, select
Remove
to
delete any undesired addresses previously set. Then
type in the IP address of the WINS server and select
Add
.
●
Once the address appears in the list of IP addresses,
select
OK
. This returns you to the
DHCP Options
window. If the address you have just added appears in
the list of IP addresses (near the bottom of the window)
return to step 10d. Otherwise, repeat step 10c.
d.
In the
DHCP Options
window, select
WINS/NBT Node
Type (046)
from the
Unused Options
list. Select
Add
to
add the node type to the
Active Options
list. In the
Byte
box, type
0x4
to indicate a mixed node, and select
OK
.
11. Click
Close
to exit to
Program Manager
.
Windows 2000 Server/Server 2003
To set up a DHCP scope on a Windows 2000 server or Server 2003
system, perform the following steps:
1. Run the Windows DHCP manager utility.
■
Windows 2000: Click
Start
, then select
Settings
and
Control Panel
. Open the
Administrative Tools
folder and
run the
DHCP
utility.
■
Server 2003: Click
Start
, then select
Control Panel
. Open
the
Administrative Tools
folder and run the
DHCP
utility.
2. In the
DHCP
window, locate and select your Windows server in
the DHCP tree.
If your server is not listed in the tree, select
DHCP
and click
the
Action
menu to add the server.
3. After selecting your server in the DHCP tree, click the
Action
menu and select
New Scope
. This runs the
Add New Scope
Wizard.
4. In the
Add New Scope
Wizard, click
Next
.
5. Enter a Name and Description for this scope, then click
Next
.
