HP Jetdirect J7949e Administrator'S Manual Download

Page: 22 / 232

ENWW

HP Software Solutions Summary 22

4. Select

Connect to a printer on the Internet

and enter the

print server’s URL:

http://

IP_address

[/ipp/

port#

]

where

IP_address

is the IP address configured on the

HP Jetdirect print server and [/ipp/port#] is an optional
parameter that defaults to /ipp/port1 for HP Jetdirect embedded
print servers.

Then click

Next

5. You will be prompted for a printer driver (the HP Jetdirect

print server does not contain printer drivers, so your system
cannot automatically obtain the driver). Click

to install the

printer driver onto your system and follow the instructions on
the screen. (You may need your printer CD-ROM to install
the driver.)

6. To complete the print path setup, follow the instructions on

the screen.

Windows Me IPP Client

The IPP implementation on the HP Jetdirect print server is
compatible with Windows Me IPP-client software. The IPP client
is installed from the

Add-Ons

folder on the Windows Me CD-ROM.

For installation and setup of a Windows Me IPP client, see the
instructions provided with the Windows Me CD-ROM.

Novell Supplied Software

The HP Jetdirect print server is compatible with IPP running on
NetWare 5.1 with SP1 or later. For NetWare client support, refer
to your NetWare technical documentation or contact Novell.

Example:

http://192.160.45.40

An IPP connection to HP Jetdirect
embedded print server with IP address
192.160.45.40. (“/ipp/port1” is
assumed and not required.)

Summary of Contents for Jetdirect J7949e









































































































































































































































Search results

Summary of Contents for Jetdirect J7949e

Reviews:

Related manuals for Jetdirect J7949e

Brands by name

Popular brands

HP Jetdirect J7949e, Administrator'S Manual

Search results

Summary of Contents for Jetdirect J7949e

Reviews:

Related manuals for Jetdirect J7949e

Brands by name

Popular brands