HP HP 4062F, Installation Manual

Page: 48 / 174

Stabilizing the System Cabinet
After the HP 4062 system is mov ed to its nal lo cation, install four an titip legs (HP part
n um b er 04062-29001) in the system cabinet. Once installed, the an titip legs and lev eling feet
stabilize and immobilize the system cabinet.
W arning
After y ou install the antitip legs, do not remo v e them unless absolutely
necessary . If the antitip legs are remo v ed, do not extend any HP 4062
instruments from the cabinet. F ailure to observ e this w arning can result in
serious injury to personnel and damage to equipment.
Install an titip legs as follows:
1. Remo v e the four an titip legs from the cabinet crate.
2. Raise the lev eling feet on the an titip legs as high as p ossible.
3. Install t w o an titip legs at the low er fron t sides of the cabinet using four screws (HP part
n um b er 0515-0963).
4. In the same manner, install t w o an titip legs at the low er rear sides of the cabinet using four
screws.
5. Lo w er the lev eling feet un til they are in con tact with the o or.
Installing P o w er Cables
If the line v oltage in y our area is 100 V ac, the HP 4062 includes a 3-meter p o w er cable. The
cable has a 30 A rating with a NEMA L5-30P plug. F or Japan, ho w ev er, the cable has a
NEMA L6-30P plug.
If the line v oltage in y our area is 120 V ac, the HP 4062 includes a 3-meter p o w er cable. The
cable has a 30 A rating with a NEMA L5-30P plug. F or Japan, ho w ev er, the HP 4062F do es
not include a main p o w er cable. The customer m ust pro vide a p o w er cable and plug that
satises the Electrical Appliance and Material Con trol Lo w, and pro vides a means of earth
grounding.
When y our site has a prop er outlet for the HP 4062 system, insert the plug of the p o w er cable
in to the outlet, and go to the next step.
If the line v oltage in y our area is b et w een 220 V ac and 240 V ac, the HP 4062 will not include
a main p o w er cable. The customer m ust pro vide a p o w er cable and plug that satises the
lo cal installation co de safety requiremen ts, and pro vides a means of earth grounding. F or
Japan, ho w ev er, the customer m ust pro vide a p o w er cable and plug that satises the Electrical
Appliance and Material Con trol Lo w. The p o w er cable m ust ha v e a 15 A rating when the
system cabinet is furnished with an emergency o unit; the p o w er cable m ust ha v e a 10 A
rating when the system cabinet is not furnished with an emergency o unit.
The following table sho ws the allo w able diameter range of the p o w er cable:
4-2 System Installation