HP HP 4062F, Installation Manual

Page: 104 / 174

13. Set select co de for series 300 computers or logical unit n um b er for series 700
computers.
Use setsysconfig command as follows:
# /usr/pcs/etc/setsysconfig
If y our system is congured in a diskless cluster en vironmen t, y ou m ust p erform this step
for eac h diskless cno de and serv er.
Set select co de (logical unit n um b er) as follo ws:
Interface bus for instrument ) 27
Interface bus for prober ) 25
14. P erform hpib4062 command to conrm HP-IB cards.
En ter as follows:
# /usr/pcs/etc/hpib4062
If y our system is congured in a diskless cluster en vironmen t, y ou m ust p erform this step
for eac h diskless cno de and serv er.
This command c hec ks whether three cards exist: 7, 25, and 27 select co de or logical unit
n um b er.
15. (HP 4062F only) Customize /usr/p cs/etc/FLCONFIG le.
The FLCONFIG le includes the information on the device selectors (select co de 2 100 +
HP-IB address) of the HP 8110As and on the connections b et w een pulse generator units
and HF p orts.
Y ou m ust sp ecify the correct connections b et w een pulse generator (PG) units and HF p orts
in this le. The default setting in this le assumes that v e HP 8110As (con taining t w o PG
units eac h) are installed in the HP 4062F system, and the PG units are connected to HF
p orts 1 to 10 as follows:
1080 ! HF1 PG11
1090 ! HF2 PG12
1100 ! HF3 PG21
1110 ! HF4 PG22
1120 ! HF5 PG31
1130 ! HF6 PG32
1140 ! HF7 PG41
1150 ! HF8 PG42
1160 ! HF9 PG51
1170 ! HF10 PG52
F or example, if three HP 8110As are installed and eac h HP 8110A has t w o PG units, add to
the PG4 x and PG5 x lines as follo ws:
1080 ! HF1 PG11
1090 ! HF2 PG12
1100 ! HF3 PG21
1110 ! HF4 PG22
1120 ! HF5 PG31
1130 ! HF6 PG32
5-12 Softw are Installation