HP HP 4062F, Installation Manual

Page: 141 / 174

2. T o v erify or c hange the calibration v alues of the system calibration mo dule, select the
NNNNNNNNNNNNNNNNNNNNNNNNNN
Reconfig softkey . Refer to the CALIBRA TION REPOR T sheet furnished with the
system calibration mo dule for the correct calibration v alues.
T o display a brief op erating guide, select the
NNNNNNNNNNNNNNNNNNNN
Help softkey . T o return to the startup
men u page, select the
NNNNNNNNNNNNNNNNNNNNNNNNNN
Return softkey .
If this step is not required, go to step 3.
a. The calibration mo dule men u page sho wn in Figure 6-30 sho ws the pro duct n um b er
of the calibration mo dules: \16346A," \16346B," and \16346C". Hewlett-Pac k ard
recommends using the HP 16346B for p erformance v erication of the HP 4085F SWM.
If y our system is equipp ed with an HP 4284A CMU84, an HP 16346C is also required.
Select the desired softkey of the pro duct n um b er according to y our system instrumen t.
F or example, if y our system is equipp ed with an HP 4284A CMU84, select the
NNNNNNNNNNNNNNNNNNNNNNNNNN
16346B softk ey and mo dify the calibration data, then select
NNNNNNNNNNNNNNNNNNNNNNNNNN
16346C softkey and
mo dify the calibration data.
d a
c b
-----------------------------------
HP 4062F PERFORMANCE VERIFICATION
-----------------------------------
Calibration Modules:
16346A : SMU TEST, VS TEST, VM TEST, AFU TEST,
CMS C-G TEST, CMS BIAS TEST
16346B : SMU TEST, VS TEST, VM TEST, AFU TEST,
CMS C-G TEST, CMS BIAS TEST
16346C : CMU84 C-G TEST, CMU84 BIAS TEST
Select a System Calibration Module for the calibration data entry.
User 1 Caps Running
aaaaaaaaaaaaaaa
16346A
aaaaaaaaaaaaaaa
16346B
aaaaaaaaaaaaaaa
16346C
aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa
Start-up
Menu
Figure 6-30. Calibration Module Menu P age
System V erification 6-29