HP HP 4062F, Installation Manual

Page: 102 / 174

<irq > The legal IR Q line c hoises for the E2071 are: 3, 5, 7, 9, 10, 11, 12, 15.
series 700 in ternal HP-IB in terface
The syn tax for the series 700 in ternal card:
<lu><symname><cardname><location>[card specific values]
Y ou can c hange only <lu> and <symname > parameters:
<lu> Logical unit n um b er of the card. Set to the following v alue.
25: for prob er con trol
27: for HP 4062 con trol
<symname > A sym b olic name for y our card. Set a desired name.
6. P erform postcustomize command to customize some les automatically .
1. P erform the postcustomize command as follows:
# /usr/pcs/etc/postcustomize
2. When \ Continue [Y/N] )" is display ed, en ter \ Y ".
If y our system is in a diskless cluster, p erform this step for serv er and eac h diskless
cno de.
This command automatically customizes the following les.
/etc/prole
/etc/csh.login
/usr/vue/cong/Xsession
/usr/lib/rmb/rm brc
/usr/lib/X11/app-defaults/Rmb
F or series 300 computers, this command also rebuilds the HP-UX k ernel for HP
BASIC/UX.
7. If y our con troller is a series 300 computer, rebo ot y our HP-UX system.
If y our con troller is a series 700 computer, skip this step.
En ter as follows:
# shutdown -r 0
8. P erform pilconf command to nish HP SICL conguration and build a new k ernel.
If y our con troller is a series 300 computer, skip this step.
T yp e as follo ws:
# /usr/pil/bin/pilconf
Press 4 Return 5 k ey for the rst to third display ed messages. T yp e \ y " for the last message
that asks if y ou w an t to reb o ot y our system.
F or details of the pilconf command, see Instal ling and Maintaining HP BASIC/UX .
9. Customize X Windo w en vironmen t.
5-10 Softw are Installation