HP digital sending software v 3.0 workflow Support Manual Download Page 62

Page: 62 / 102

58 Chapter 4 - Configuration

ENWW

XML file generation (KO2XML component)

The KO2XML component provides the basic attributes that control the
creation of an XML file. These attributes activate, control the file
attributes, XML content, and control deletion of the original file after
an XML file is created.

Note

XML file generation limits the file size to 2 MB.

General tab

Table 4-17. HPS file generation (KO2XML)

Setting

Option

Function

Activate

On/off

File Name

Author

Comments

Embed Documents

Include Field

Delegate Original
Documents

This enables or disables the
XML file generation.

This is the XML file name.

This populates the author field
attribute for the generated XML
file.

This populates the comment
field attribute for the generated
XML file.

This embeds the image file
within the XML file. Selecting
this option creates an ASCI
representation of the binary
image file within the XML file.

This includes the fields that are
created in the Field Values and
User Fields tabs of the
KO2XML component.

This deletes the original image
file. Select this option if only the
XML file is being sent to the
final location.

Note
By not selecting this option you
can have both the XML file and
the original file stored in the
final location.

Summary of Contents for digital sending software v 3.0 workflow







































































































Search results

Summary of Contents for digital sending software v 3.0 workflow

Reviews:

Related manuals for digital sending software v 3.0 workflow

Brands by name

Popular brands

HP digital sending software v 3.0 workflow, Support Manual

Search results

Summary of Contents for digital sending software v 3.0 workflow

Reviews:

Related manuals for digital sending software v 3.0 workflow

Brands by name

Popular brands