HP digital sending software v 3.0 workflow, Support Manual

Page: 37 / 102

ENWW
Introduction 33
4
Configuration
Introduction
Use the HP DSS Workflow Configuration Utility to create workflow
keys and to administer server settings. Administrators can gain
access to the HP DSS Workflow Configuration Utility on the computer
where the HP DSS Workflow software is installed.
Opening the HP DSS Workflow Configuration
Utility
●
Click Start, point to Programs, point to Hewlett-Packard, point
to Digital Sending Software Workflow, and then click
HP DSS Workflow.
-OR-
●
Click Start and then click Control Panel. Double-click the
HP DSS Workflow object.
Navigating within the HP DSS Workflow
Configuration Utility
●
Use the tabs at the top of the HP DSS Workflow Configuration
Utility screen to gain access to configuration settings for the
software.
●
Use the tabs at the bottom of the configuration dialog boxes to
gain access to the associated property pages for the component.
●
Click the function buttons to manipulate the selected
components.
Note
Buttons labeled “…” open the Property dialog boxes for that
component.
●
Click OK or Cancel to exit the Settings dialog boxes.
●
Click Apply to save configuration changes.