HP digital sending software v 3.0 workflow, Support Manual

Page: 24 / 102

20 Chapter 3 - Setup, installation, and authentication
ENWW
Supported MFPs and firmware
●
HP LaserJet 4100mfp: 03.757.0 or later
●
HP LaserJet 9000mfp: 03.757.0 or later
●
HP LaserJet 9055mfp
●
HP LaserJet 9065mfp
●
HP Jetdirect J4169 or J6057: 24.08 or later
To find the firmware and Jetdirect card information, use the following
procedure.
1 Type http://<YOURDEVICEADDRESS> (where
<YOURDEVICEADDRESS> is the IP address of the MFP that
you are researching) into the Web browser.
2 Click the Networking tab (not applicable for the
HP LaserJet 9055mfp or 9065mfp).
3 Click Configuration Page and then look for the model number.
Environments and protocols
Network operating systems
The HP DSS Workflow is directly connected to transmission control
protocol/internet protocol (TCP/IP) networks through a server or
workstation. It operates independently within the following network
and operating system (OS) requirements:
●
Windows 2000 workstation or server or Windows XP Professional
●
Fast Ethernet 100Base-TX or Ethernet 10Base-T
●
Microsoft Internet Explorer 4.0 or later
Novell NetWare support
With access to Novell file servers, HP DSS Workflow can write files
into network folders and support network fax folders that reside on
Novell servers. The Novell client software must be installed on the
network and correctly configured before Novell-specific attributes can
be configured in HP DSS Workflow.