HP digital sending software v 3.0 workflow, Support Manual

Page: 42 / 102

38 Chapter 4 - Configuration
ENWW
General tab
Use the General tab on the HP LaserJet 4100mfp and 9000mfp to
create the following form attributes:
●
Form check box. Select the check box to activate the form fields.
If this check box is clear, then an Action button that does not
correspond to a field is added. Use that Action button to create a
single-step scanning operation, such as Send-To-Printer, where
the user might not need to specify any field values.
●
Form name. This names the form that appears as a button name
in the MFP function-key hierarchy.
●
Scanning mode. This describes the supported scanning mode.
●
File format. This describes the supported file format.
●
Action-button name. This is the button name that appears as
the last key on the form. Use a descriptive action name such as
“Scan” or “Scan to” to indicate what procedure the Action button
activates.
●
Multiscan. Select this value to prompt the user after each scan
job for additional pages to be scanned. This is a useful option
when the documents are not contiguous, or when documents
require the use of both the automatic document feeder (ADF) and
the flatbed scanner.
Use the General tab on the HP LaserJet 9055mfp and 9065mfp to
create the following form attributes:
●
Button name. This is the function key name that appears on the
control panel.
●
Scanning mode. This describes the supported scanning mode.
●
File format. This describes the supported file format.