HP Cluster Platform Express v2010 User Manual Download Page 119 | Manualshive

Page: 119 / 140

background image

D ISR 9288 Interconnect Specifications

The technical specifications of the ISR 9288 are as follows:

Specification

Feature

Based on passive Midplane boards which allow the IB differential signals, control signals
and power connectivity between the different boards in the chassis.

Chassis Architecture

Cables for InfiniBand, management, and power all located at the rear.

Four slots of fabric boards in front and 12 slots for a combination of line boards/router
blades drawer in the rear.

Up to four hot-swappable fabric boards (sFB-12), which support the switching FAT Tree
topology and provide the following features:
• Hot-swappable operation with no traffic disruptions.
• 2Kbit I²C controlled EEPROM’s to store the InfiniScale III ERP (Embedded RISC

processor) code.

• On board temperature monitoring reported to the management system.
• Indicators:

— Port physical connectivity and logical connectivity LEDs
— Power, information, and hot-swap LEDs on boards.

Fabric Board

Two hot swappable (sMB) board including a CPU Mezzanine. On board Temperature
monitoring reported to optional Management system.
• InfiniBand managers:

— Subnet manager
— Subnet administrator

• InfiniBand Agents:

— Subnet manager agent
— Performance manager agent
— Baseboard manager agent

• Supports IETF Standard SNMPv2
• Provides the following connectors:

— 10/100 Ethernet RJ45
— EIA/TIA-232 Console RJ45

sMB Management Board

Up to 12 hot-swappable Line (sLB-24) boards, providing the following features:
• 24, auto-sensing 1x/4x InfiniBand ports (2.5/10 Gb/s)
• Alternative 1:8 12X InfiniBand ports (30 Gb/s)
• Alternative 2:4 12X and 12 4X InfiniBand ports
• Connectors: 8-pair MicroGigaCN / LANELINK F CONN
• Indicators: Physical connectivity and logical connectivity LEDs per port, power and

info LEDs

• On board temperature monitoring reported to the management system

Line Board

• 1.536 Tb/sec port-to-port data throughput
• 1.536 Tb/sec port-to-port data throughput
• 420 nanoseconds latency (max.)
• 8 Data Virtual Lanes
• 1 Management Virtual Lanes
• MTU 4096 Bytes, max
• 3 Maximum hops

Interconnect Switching
Specifications

119

«
...
117
118
119
120
121
...
»

Summary of Contents for Cluster Platform Express v2010













































































































































Reviews:

No comments

Related manuals for Cluster Platform Express v2010

Brand: Acorn computer Pages: 182

Brand: DAQ system Pages: 21

Brand: SAMSys Pages: 60

Brand: Nedap Pages: 5

Brand: IBM Pages: 56

Brand: Dormakaba Pages: 27

SCSI/VGA COMBO CARD

Brand: Acer Pages: 12

DynaVivid Graphics Dock

Brand: Acer Pages: 56

Brand: Bosch Pages: 40

LECTUS enroll 5000 MD

Brand: Bosch Pages: 2

Brand: Bosch Pages: 8

Brand: Bosch Pages: 24

Brand: Bosch Pages: 44

Brand: Bosch Pages: 88

Brand: Bosch Pages: 32

Brand: TSYS Pages: 83

OBID i-scan ID ISC.MR200-EP

Brand: Feig Electronic Pages: 53

iRANGE IR-UNIREAD

Brand: Laser Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands