HP Cluster Platform Express v2010 User Manual Download Page 12 | Manualshive

Page: 12 / 140

background image

Description

Chapter

Defines the operational and technical specifications for the 4x DDR InfiniBand Switch
Module for the c-Class Bladesystem enclosure.

Appendix E: 4x DDR IB
Switch Module
Specifications

Defines the operational and technical specifications for the HCA-400-series and other
HCA cards installed in cluster nodes.

Appendix F: HCA PCI
Card Specifications

Audience

This manual is intended for experienced hardware administrators of large-scale computer systems,
and for HP Global Service representatives. This manual references skilled tasks and describes
important safety considerations and is not intended as a training aide. The information in this
manual assumes that the reader has the following skills and abilities:
•

Familiar with the theory and implementation of the high-speed system interconnect
technology used to create clusters.

•

Familiar with the fundamentals of router-based networking, networking concepts, network
switch technology, and network cables.

•

Trained to configure hardware equipment. It is assumed that readers are familiar with
InfiniBand technology and terminology.

•

Familiar with the operating environment software.

•

Familiar with HP rack-mounted servers and associated rack hardware.

•

Has read the HP Cluster Platform Overview and the HP Cluster Platform Site Preparation Guide,
and is familiar with HP Cluster Platform architecture and concepts.

Related Documentation

The following documents may be useful references when you are installing and administering
the HP Cluster Platform cluster.

Voltaire Documentation

The Voltaire documentation consists of the following information:
•

Voltaire ISR 9024 S/D Installation Manual — Explains how to install the ISR 9024 Switch

•

Voltaire Switch 9024, 9096, and 9288 User Manual — Explains how to use Voltaire switches
used in HP Cluster Platform solutions

•

Release notes for InfiniBand interconnects

You can also find Voltaire documentation at the following URL:

http://www.voltaire.com/partner_login.htm

You will require the appropriate login credentials which are available from Voltaire.

HP Cluster Platform Documentation

The HP Cluster Platform documentation consists of the following information:
•

The HP Cluster Platform Overview — Provides a technical overview of the architecture,
hardware, software, and features of an HP Cluster Platform solution.

•

The HP Cluster Platform Site Preparation Guide – Explains how to prepare a site to receive an
HP Cluster Platform solution.

•

The InfiniBand Interconnect Installation and User's Guide – Describes the system interconnect
and installation procedures for the InfiniBand interconnect.

•

HP Cluster Platform InfiniBand Cabling Tables – Describes the cabling port ID naming
conventions for InfiniBand interconnects used in HP Cluster Platform solutions.

•

Ethernet Network Cabling Tables – Describes procedures for cabling the cluster's console and
administrative networks.

12

«
...
10
11
12
13
14
...
»

Summary of Contents for Cluster Platform Express v2010













































































































































Reviews:

No comments

Related manuals for Cluster Platform Express v2010

NI Vision NI PCI-1424

Brand: National Instruments Pages: 28

Brand: Gigabyte Pages: 32

Brand: ADLINK Technology Pages: 60

Brand: Decision-Computer Pages: 8

Brand: Iron logic Pages: 1

Brand: Konig Pages: 66

Brand: SCM Microsystems Pages: 59

Brand: Gallagher Pages: 126

Brand: Takstar Pages: 36

PXI Express NI PXIe-1073

Brand: National Instruments Pages: 42

Brand: Abocom Pages: 2

Brand: Hama Pages: 2

Brand: Magstripe Pages: 16

Brand: Conrad Pages: 8

Brand: Zonet Pages: 2

Brand: aqprox! Pages: 8

Brand: aqprox! Pages: 39

Brand: Yamaha Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands