HP Cluster Platform Express v2010 User Manual Download | Manualshive

Page: 93 / 140

background image

8 Installing and Maintaining HCA Cards and Mezzanines

A feature of InfiniBand fabrics is that individual components can contain an InfiniBand host
channel adapter (HCA), or as in the case of an HP BladeSystem server blade, a mezzanine HCA.
Every device containing an HCA is a visible and manageable part of the InfiniBand fabric. The
HCA can be an integrated circuit that is embedded on the circuit board of a device, (such as a
storage array controller) or it can be in the form of a PCI card that you install in a server. In HP
Cluster platform, the HCA can be a single-port, or a dual-port InfiniBand PCI card. This chapter
thoroughly describes Voltaire HCA cards and briefly describes several other models used in HP
Cluster Platform as follows:

•

Voltaire HCA 400 PCI–X and HCA 400 PCI–Express. (See

Section 8.1

).

•

Installing the HCA, (See

Section 8.2

).

This chapter also provides brief descriptions of the various HCAs used in HP Cluster Platform:
•

Topspin/Mellanox SDR PCI–X. (See

Section 8.3

).

•

Topspin/Mellanox SDR PCI–Express. (See

Section 8.4

).

•

Mellanox SDR PCI–X. (See

Section 8.5

).

•

Mellanox SDR PCI–Express. (See

Figure 8-6

).

•

Mellanox Memory-Free SDR PCI-Express. (See

Section 8.7

).

•

Mellanox Memory-Free DDR PCI-Express. (See

Section 8.8

).

•

Mellanox DDR PCI-Express. (See

Section 8.9

).

•

HP HPC 4x DDR IB Mezzanine HCA (See

Section 8.9.2

).

Note:

Specific combinations of HCA card and card firmware are required to support operating
environments such as HP XC.

Consult the InfiniBand Firmware Matrix and Qualified Solutions Tables in the InfiniBand Fabric
Management and Diagnostic Guide or on the web at

http://docs.hp.com/en/highperfcomp.html

.

8.1 Overview of the Voltaire HCA 400 PCI–X, and HCA 400 PCI-Express
Cards

Figure 8-1

shows the HCA-400 PCI card. Information about the HCA-400 and HCA-400Ex is

provided in this section. In the text, the card is referred to as the HCA and any differences between
the two models are clearly specified. This section shows a typical HCA card and also how to
install a typical HCA card.

8.1 Overview of the Voltaire HCA 400 PCI–X, and HCA 400 PCI-Express Cards

93

«
...
91
92
93
94
95
...
»

Summary of Contents for Cluster Platform Express v2010













































































































































Reviews:

No comments

Related manuals for Cluster Platform Express v2010

Express5800/320Ma

Brand: NEC Pages: 74

Brand: StarTech.com Pages: 10

MIPort Universal PCI Cards 3PCIOU1

Brand: B&B Electronics Pages: 4

Brand: TerraTec Pages: 23

Brand: DAQ system Pages: 21

Brand: Renkforce Pages: 2

Brand: HID Pages: 2

Brand: Gigabyte Pages: 38

Brand: Lynx Studio Technology Pages: 36

Brand: Ezquest Pages: 1

Brand: Alpha Pages: 14

Brand: Virident Pages: 33

Brand: ADLINK Technology Pages: 107

Brand: ADLINK Technology Pages: 110

Brand: SeaLevel Pages: 21

Brand: Novatel Pages: 9

Brand: Novatel Pages: 20

Brand: Quatech Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands