HP Cluster Platform Express v2010, User Manual

Page: 56 / 140

Figure 4-5 ISR 9096 Accessories Box
1
3
2
4
5
Description Item
Ground stud kit 1
Console cable 2
ISR 9096 Product CD and other CDs, depending on system configuration 3
Power cable 4
Tray screws kit 5
4. Configurations that include cable management will also have the following items in the
accessories box:
•
Cabling guide bracket for cable management.
• Cable management screws.
5. Remove all of the above components and the foam grips from the top of the chassis.
6. Holding the remaining foam grips on each side, remove the ISR 9096 chassis from the box
and place it on a flat surface.
4.2.3 Verifying the Shipment
The chassis is shipped in a rigid container with the SFU-4 and SFU-8 fan modules installed in
the front of the chassis, and the sCTRL board in the rear. Additional boards and optional
components are shipped in a separate carton. A shipment typically contains the following items
in addition to the chassis:
•
Generic brackets for rack mounting. These brackets are not used in an HP Cluster Platform
configuration. use only the HP 10000–series rack mounting kit that is provided with the HP
Cluster Platform.
• Generic cable guide hooks that are not used in an HP cluster platform installation. Use only
the cable guide hooks supplied with the HP Cluster Platform.
• Product CD and printed documentation. This documentation is superseded by the HP
Cluster Platform documentation, unless otherwise stated in this guide.
• sFB-12 fabric modules.
• sLB-24 line modules.
• sMB management modules (one or more).
• sPSU power supply modules (one or more)
• Other field replaceable units (FRUs) might be shipped in an additional cardboard carton.
Check for loose parts or any visible damage to the contents. If any damaged or missing parts
have been detected, notify your HP sales representative.
56 Installing and Maintaining the ISR 9096 and ISR 9288 Interconnects