manualshive.com logo in svg

HP A7533A - Brocade 4Gb SAN Switch Base, Administrator'S Manual

The HP A7533A - Brocade 4Gb SAN Switch Base is a high-performance networking solution essential for seamless data transmission in large-scale storage area networks. Stay up-to-date with the latest features and enhancements by downloading the free Release Note and User Manual from manualshive.com. Experience hassle-free connectivity with this industry-leading product.

Share
Download
background image

Fabric OS 6.2 administrator guide 517

FICON emulation configuration values

You can display the values configured for FICON emulation by issuing the 

portShow ficon

 command. 

The following example shows FICON emulation configuration values for port ge1:

Sprint108:root> 

portshow ficon ge1 all

Port: ge1

VE_STATUS

TunnelId vePort vePortStatus veFeatureBitMap veHashEntryCount

   0      24       UP              1              2

   1      ff     DOWN              0              0

   2      ff     DOWN              0              0

   3      ff     DOWN              0              0

   4      ff     DOWN              0              0

   5      ff     DOWN              0              0

   6      ff     DOWN              0              0

   7      ff     DOWN              0              0

FEATURES

TunnelId  XRC  TapeWrt  TapeRd  TinTir  DvcLack  RdBlkId

   0       ON     ON       ON      ON      ON       OFF

   1      OFF    OFF      OFF     OFF     OFF       OFF

   2      OFF    OFF      OFF     OFF     OFF       OFF

   3      OFF    OFF      OFF     OFF     OFF       OFF

   4      OFF    OFF      OFF     OFF     OFF       OFF

   5      OFF    OFF      OFF     OFF     OFF       OFF

   6      OFF    OFF      OFF     OFF     OFF       OFF

   7      OFF    OFF      OFF     OFF     OFF       OFF

PARAMETERS

TunnelId WrtPipe RdPipe WrtDevs RdDevs WrtTimer WrtChain OxidBase DebugFlags

   0      032     032     16      16     0300    3000000  0x7000  0xffc80000

   1      000     000     00      00     0000    0000000  0x0000  0x00000000

   2      000     000     00      00     0000    0000000  0x0000  0x00000000

   3      000     000     00      00     0000    0000000  0x0000  0x00000000

   4      000     000     00      00     0000    0000000  0x0000  0x00000000

   5      000     000     00      00     0000    0000000  0x0000  0x00000000

   6      000     000     00      00     0000    0000000  0x0000  0x00000000

   7      000     000     00      00     0000    0000000  0x0000  0x00000000

FICON emulation modification

Following is the syntax for the 

portcfg ficon modify

 command:

portCfg ficon [slot/]ge0|ge1 tunnel_Id modify [-x 1|0] [-w 1|0] [-r 1|0] [-t 1|0] 
[-l 1|0] [-b 1|0] [wrtMaxPipe value] [rdMaxPipe value] [wrtMaxDevs value] 
[rdMaxDevs value] 
[wrtTimer value] [wrtMaxChains value] [oxidBase value] [dbgFlags value] [xrcErr] 
[LrcCheck]

where:

•

slot

 is the number of a slot in a 4/256 SAN Director or DC Director chassis that contains a B-Series 

Multi-protocol Router blade. This parameter does not apply to the stand-alone 400 MP Router.

•

ge0|ge1

 is the Ethernet port used by the tunnel (ge0 or Ge1).

•

tunnel_id

 is the tunnel number (0 - 7).

•

modify

 is the modify option that changes the FICON emulation configuration options and 

parameters.

The following options turn features on and off. The associates tunnels must be disabled to modify the option 

settings. If you attempt to do them on an enabled tunnel, the operation is not allowed, and you are 

prompted to disable the tunnel.

•

-x 

1|0

 enables or disables XRC emulation. 1 is enable, O is disable.

•

-w 

1|0

 enables or disables tape write pipelining. 1 is enable, O is disable.

Summary of Contents for A7533A - Brocade 4Gb SAN Switch Base

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for A7533A - Brocade 4Gb SAN Switch Base

Accutone AU300 Install Manual & User Manual preview
AU300
Brand: Accutone Pages: 8
Linksys AG310 User Manual preview
AG310
Brand: Linksys Pages: 87
IBM ThinkPad Enhanced Drive Adapter User Manual preview
ThinkPad Enhanced Drive Adapter
Brand: IBM Pages: 82
Wayne-Dalton USB Z-Wave User Manual preview
USB Z-Wave
Brand: Wayne-Dalton Pages: 42
Teletronics International EZLoop 21-110 Quick Product Manual preview
EZLoop 21-110
Brand: Teletronics International Pages: 2
StarTech.com PCI220USB Instruction Manual preview
PCI220USB
Brand: StarTech.com Pages: 10
Allen-Bradley 2071-TBMF Installation Instructions preview
2071-TBMF
Brand: Allen-Bradley Pages: 2
aqprox! APPUAN40WV4 User Manual preview
APPUAN40WV4
Brand: aqprox! Pages: 37
NETGEAR XAV1501 - Powerline AV+ 200 Adapter Installation Manual preview
XAV1501 - Powerline AV+ 200 Adapter
Brand: NETGEAR Pages: 2
StarTech.com MDP2VGDVHD Instruction Manual preview
MDP2VGDVHD
Brand: StarTech.com Pages: 2
oticon TVA3 Instructions For Use Manual preview
TVA3
Brand: oticon Pages: 54
Abocom WUG2690 Specification Sheet preview
WUG2690
Brand: Abocom Pages: 2
Grandstream Networks HT702 Quick Start Manual preview
HT702
Brand: Grandstream Networks Pages: 4
Grandstream Networks HandyTone 286 Quick Installation Manual preview
HandyTone 286
Brand: Grandstream Networks Pages: 11
Grandstream Networks HT801 Administration Manual preview
HT801
Brand: Grandstream Networks Pages: 49
Crucial SK01 Installation And User Manual preview
SK01
Brand: Crucial Pages: 25
EnGenius EUB9603 EXT User Manual preview
EUB9603 EXT
Brand: EnGenius Pages: 45
Parker EC-UR4-F User Manual preview
EC-UR4-F
Brand: Parker Pages: 2

Brands by name

Popular brands

Load more brands