manualshive.com logo in svg

HP A7533A - Brocade 4Gb SAN Switch Base, Administrator'S Manual

The HP A7533A - Brocade 4Gb SAN Switch Base is a high-performance networking solution essential for seamless data transmission in large-scale storage area networks. Stay up-to-date with the latest features and enhancements by downloading the free Release Note and User Manual from manualshive.com. Experience hassle-free connectivity with this industry-leading product.

Share
Download
background image

Fabric OS 6.2 administrator guide 277

CP blades

The HP StorageWorks 4/256 SAN Director supports the CP4 blade. The HP StorageWorks DC SAN 

Backbone Director and HP StorageWorks DC04 SAN Director Switch support the CP8 blades.
The CP blades in the HP StorageWorks DC SAN Backbone Director and HP StorageWorks DC04 SAN 

Director Switch are hot-swappable. When the CPs from an HP StorageWorks DC SAN Backbone Director 

are inserted into an HP StorageWorks DC04 SAN Director Switch, the switch type changes. The same is 

true when inserting a CP blade from an HP StorageWorks DC04 SAN Director Switch into an HP 

StorageWorks DC SAN Backbone Director. When a CP blade with a Fabric OS of pre-6.2.0 is inserted 

into an HP StorageWorks DC04 SAN Director Switch, the blade becomes faulty. You can correct this by 

upgrading the firmware on the CP blade in an HP StorageWorks DC SAN Backbone Director or HP 

StorageWorks DC04 SAN Director Switch chassis using the 

firmwareDownload

 command. 

48-port 8-Gb/s Port Blade

HP 

StorageW

orks SAN 

Director 

48 Port 

8Gb FC 

Blade

51

A 48-port HP StorageWorks Platform Port Blade 

supporting 1, 2, 4, and 8 Gb/s port speeds. HP 

StorageWorks SAN Director 48 Port 8Gb FC 

Blade support only F_Ports and E_Ports; FL_Ports 

are not supported. This port blade is compatible 

only with the HP StorageWorks DC SAN 

Backbone Director CP Blades. HP StorageWorks 

SAN Director 48 Port 8Gb FC Blades do not 

support FL_Ports.

6-port 10-Gb/s Port Blade

HP 

StorageW

orks SAN 

Director 6 

Port 10Gb 

FC Blade

39

A 6-port HP StorageWorks Platform Port Blade 

supporting 10 Gb/s port speed. Blade provides 

10-Gb/s ISLs. This port blade is compatible only 

with the HP StorageWorks 4/256 SAN Director 

CP Blades (using chassis configuration option 5) 

and the HP StorageWorks DC SAN Backbone 

Director and HP StorageWorks DC04 SAN 

Director Switch CP Blades.

Fibre Channel Router Blade

B-Series 

Multi-Proto

col Router 

Blade

24

A 16-port Fibre Channel Routing and FCIP Blade 

that also has 2 GbE ports and is compatible only 

with the HP StorageWorks 4/256 SAN Director 

(using chassis configuration option 5) and the HP 

StorageWorks DC SAN Backbone Director and 

HP StorageWorks DC04 SAN Director Switch CP 

Blades. 

iSCSI Bridge Blade

HP 

StorageW

orks 

B-Series 

iSCSI 

Director 

Blade

31

An iSCSI bridge Blade that enables bridging of 

iSCSI hosts to Fibre Channel fabrics. It has 8 Fibre 

Channel optical SFP ports and 8 GbE copper 

RJ-45 ports. This blade is currently compatible with 

the HP StorageWorks 4/256 SAN Director CP 

Blades (using chassis configuration option 5).

Fibre Channel Application 

Blade

FA4-18

33

An application blade that has 16 (1-, 2-, and 

4-Gb/s) ports supporting Fibre Channel 

Application Services and 2-10/100/1000 BaseT 

Ethernet copper interfaces supporting blade 

management.

HP Encryption Blade

FC8-18

43

An application blade that provides high 

performance 32 port auto-sensing 8 Gb/s Fibre 

Channel connectivity with data cryptographic 

(encryption/decryption) and data compression 

capabilities.

Table 70

HP StorageWorks enterprise-class platform terminology and abbreviations (continued)

Blade name

Abbrev.

Blade 

ID

(slotsh

ow)

Definition

Summary of Contents for A7533A - Brocade 4Gb SAN Switch Base

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for A7533A - Brocade 4Gb SAN Switch Base

ZyXEL Communications 802.11G G-210H Specifications preview
802.11G G-210H
Brand: ZyXEL Communications Pages: 2
Z-Com XN-790 User Manual preview
XN-790
Brand: Z-Com Pages: 46
Belkin USB/SCSI Adapter F5U115-UNV Installation Instructions preview
USB/SCSI Adapter F5U115-UNV
Brand: Belkin Pages: 2
BAZOO 28787 Quick Installation Manual preview
28787
Brand: BAZOO Pages: 2
Titan Electronics USB-2CAN-M User Manual preview
USB-2CAN-M
Brand: Titan Electronics Pages: 76
Jabra LINK 280 - Software Manual preview
LINK 280 -
Brand: Jabra Pages: 3
ASIX AX88178 Driver Installation Manual preview
AX88178
Brand: ASIX Pages: 16
Black Box IC138A-R2 Manual preview
IC138A-R2
Brand: Black Box Pages: 20
Zenisu Keisoku ZS-6123BP User Manual preview
ZS-6123BP
Brand: Zenisu Keisoku Pages: 14
Conceptronic C100U Quick Manual preview
C100U
Brand: Conceptronic Pages: 16
Linksys LINKSYS WMP300N Quick Installation Manual preview
LINKSYS WMP300N
Brand: Linksys Pages: 8
LD CURV 500 SLA User Manual preview
CURV 500 SLA
Brand: LD Pages: 2
Boca Systems Webglider-460 Reference Manual preview
Webglider-460
Brand: Boca Systems Pages: 104
Crown IQ-PIP-USP2 Specifications preview
IQ-PIP-USP2
Brand: Crown Pages: 2
Compex NetPassage WLM54AGP23 Quick Install Manual preview
NetPassage WLM54AGP23
Brand: Compex Pages: 6
Compex iWavePort WLU11A User Manual preview
iWavePort WLU11A
Brand: Compex Pages: 65
Compex iWavePort Series User Manual preview
iWavePort Series
Brand: Compex Pages: 94
Linksys USB100TX - EtherFast 10/100 USB Network Adapter Specifications preview
USB100TX - EtherFast 10/100 USB Network Adapter
Brand: Linksys Pages: 2

Brands by name

Popular brands

Load more brands