Honeywell VideoBloX User Manual Download

Page: 93 / 180

Honeywell

USERS

Users Detail

The fields necessary to define users are on the

Users

tab.The

Users Detail

tab is used

to enter all basic information for a user. At least one user must be defined.

Figure 3-22 Users – Detail Configuration

Field Definitions

Field

Description

HEADING

User Number

Number assigned to the user being configured.

Enabled

Indicates whether the user is allowed to use the system or
not. When enabled, the user has access to the system.

User Name

Name of the user as entered in the NAME section of the tab.

NAME

Name

Used to enter the User’s Name. The User Name can be up to
24 characters. The User Name is for reference and reporting.
The User Name is not outputted on the PVT channel.

Short Name

Abbreviated user name (up to 14 characters).

Language

Language used when this user logs into the system.

Note:

Summary of Contents for VideoBloX





















































































































































































Search results

Summary of Contents for VideoBloX

Reviews:

Related manuals for VideoBloX

Brands by name

Popular brands

Honeywell VideoBloX, User Manual

Search results

Summary of Contents for VideoBloX

Reviews:

Related manuals for VideoBloX

Brands by name

Popular brands