Honeywell VideoBloX User Manual Download Page 68

Page: 68 / 180

SYSTEM CONFIGURATION

DEDICATED VCR

Type

Type of device as determined by the device configuration
tab. Standard VCR = Type 1. Mux = Type 2.

Address

Control address for the VCR/Device associated with this
input.

Steps for Configuring Video Input Details

1. On

the

Inputs

screen, select the

Detail

tab on the right side of the window.

2. Select

the

Input Number

to be used for this input.

3. Enter

the

Physical I/P

address of the input connection.

4. Select whether the input is a

Static

(fixed) or

PTZ

camera.

If PTZ is selected, enter the PTZ Address. If the PTZ is connected via PIT44 through
Com 3, the

Board Addr

is useless.

6. If audio is associated with this input, check the box to

Enable

audio and

enter the physical address of the audio input.

7. To enable automatic

Video Loss

detection, check the

Enabled

box,

set the

Priority

, and select a

Sequence

to run when video loss is detected.

Edit

the Sequence if needed.

8. To enable automatic

Video Restore

detection, check the

Enabled

box,

set the

Priority

, and select a

Sequence

to run when video loss is detected.

Edit

the sequence if needed.

9. To enable an

Alternate View

for this input, check the

Enabled

box and

set the

Channel

of the alternate view/input.

10. To associate a

Dedicated VCR

or device with this input, select the device

Type

and

Address.

The type definition of device and the device command frame,

please refer section Device in this chapter.
Disable this option by selecting Disabled.

11. Enter

Notes

about this input in this free-form field. It is helpful to include camera

model number, lens, and location of power supply.

12. Select

to save/download all information from the current page.

Input Title

The

Inputs Title

tab is used to enter all logical characteristics for the video input.

Input Title can be entered here as text on the Titled Video Output Module or on the PVT
channel.

Summary of Contents for VideoBloX





















































































































































































Search results

Summary of Contents for VideoBloX

Reviews:

Related manuals for VideoBloX

Brands by name

Popular brands

Honeywell VideoBloX, User Manual

Search results

Summary of Contents for VideoBloX

Reviews:

Related manuals for VideoBloX

Brands by name

Popular brands