Honeywell VideoBloX User Manual Download Page 119

Page: 119 / 180

Honeywell

103

Figure 3-46 Tods Configuration

Field Definitions

Field

Description

HEADER

TOD Number

Number assigned to the Time of Day Event being defined.

DESCRIPTION

Name/description given to the Time of Day Event being defined.
The name/description can be up to 24 characters. The description
is used for referencing and reporting. The description is not
outputted on the PVT channel.

Short Name

Abbreviated description for the Time of Day Event being defined.
The Short Name is used in certain reports.

TRIGGER

Day

Day of the week on which the event will be triggered.

Time

Time of day at which the event will be triggered.

EVENT ACTION

Enabled

Enable the event action if date and time conditions are met.

Summary of Contents for VideoBloX





















































































































































































Search results

Summary of Contents for VideoBloX

Reviews:

Related manuals for VideoBloX

Brands by name

Popular brands

Honeywell VideoBloX, User Manual

Search results

Summary of Contents for VideoBloX

Reviews:

Related manuals for VideoBloX

Brands by name

Popular brands