Honeywell VideoBloX User Manual Download Page 127

Page: 127 / 180

Honeywell

111

Figure 3-50 Sequences – Access Configuration

Field Definitions

Field

Description

HEADING

Sequence Number

Number assigned to the keyboard being configured.
This field carries over from the Detail screen.

Sequence Name

Name associated with this keyboard.
This field carries over from the Detail screen.

GROUP NAME
(COLUMN)

Available groups are displayed in columns.

SEQUENCE
ACCESS (ROW)

Indicates the groups in which the sequence is included /
excluded.

Steps for Configuring Sequence Access

1. From

the

Sequence

screen, select the

Access

Tab

2. Set access for each sequence using the following methods:

•

Click on the

Access button

to include this sequence in / exclude this sequence

from ALL groups. (Include =

Exclude =

). Click on the

Access button

again

to toggle between include/exclude settings.

•

Click on a

Group

column or on an individual cell (in the Access row) on the table

to include
this sequence in / exclude this sequence from the particular group.

Access Button

Heading

Access tab

Summary of Contents for VideoBloX





















































































































































































Search results

Summary of Contents for VideoBloX

Reviews:

Related manuals for VideoBloX

Brands by name

Popular brands

Honeywell VideoBloX, User Manual

Search results

Summary of Contents for VideoBloX

Reviews:

Related manuals for VideoBloX

Brands by name

Popular brands