Honeywell
91
KEYBOARD
ACCESS (ROW)
Indicates the groups in which the keyboard is included /
excluded. (Groups shown depend on sub-level selected.)
Steps for Configuring Keyboard Access
1. From
the
Keyboards
screen, select the
Access tab
. Choose from the sub-levels
available: Cameras, Monitors, Keyboards, Sequences, Functions, or Devices.
2. Set access for each keyboard using the following methods:
•
Click on
Access
button
to include this keyboard in / exclude this keyboard from
ALL groups. (Include =
9
/
Exclude =
U
). Click on the
Access button
again to
toggle between include/exclude settings.
•
Click on a
Group
column or on an individual cell (in the Access row) on the table
to include this keyboard in / exclude this keyboard from the particular group.
(Include =
9
/
Exclude =
U
). Click on the
Group
again to toggle between
include/exclude settings.
Keyboards can be in more than one group at a time.
3. Select
to save/download all information from the current page.
4. Repeat steps 1-3 as needed to configure keyboard access in any of the remaining
sub-levels.
5. Users should log out then log back in to see keyboard configuration changes.
Keyboard Notes
The
Keyboards Notes
tab is used to enter any notes applicable to the keyboard.
Suggested entries: model number, serial number, physical location and classification
(security/surveillance).
Summary of Contents for VideoBloX
