Honeywell VideoBloX User Manual Download

Page: 100 / 180

SYSTEM CONFIGURATION

Field Definitions

Field

Description

HEADING

User Number

Number assigned to the user being defined.
This field carries over from the Detail screen.

User Name

Name associated with this user.
This field carries over from the Detail screen.

NOTES

Free-text field.

Steps for Entering User Notes

1. From

the

Users

window, select

Notes

2. Enter

Notes

about this user in this free-form field.

3. Select

to save/download all information from the current page.

KEYBOARDS

Keyboards Detail

The fields necessary to configure a keyboard are on the

Keyboards tab.

The

Keyboards Detail

tab is used to enter all physical characteristics for a keyboard.

NOTE:

Keyboard capabilities are also related to user permissions/functions.

Figure 3-26 Keyboards – Detail Configuration

Summary of Contents for VideoBloX





















































































































































































Search results

Summary of Contents for VideoBloX

Reviews:

Related manuals for VideoBloX

Brands by name

Popular brands

Honeywell VideoBloX, User Manual

Search results

Summary of Contents for VideoBloX

Reviews:

Related manuals for VideoBloX

Brands by name

Popular brands