Honeywell VideoBloX User Manual Download

Page: 109 / 180

Honeywell

Figure 3-30 Keyboards – Group Names Configuration

Field Definitions

Field

Description

HEADING

Keyboard Number

Number assigned to the keyboard being configured.
Carries over from Keyboard Detail tab.

Keyboard Name

Keyboard name as edited in the Keyboards Detail tab.

GROUP NUMBER

Number assigned to each keyboard group.

GROUP NAME

Text entered to name/identify a particular keyboard group.

Steps for Configuring Keyboard Group Names

1. Select a group number to use.

NOTE:

Group number is an editable text field capable of accepting numeric values. In

the database, the group number is still defined as originally set.

For example, default values are shown as 1, 2, 3, 4, etc. If “2” is revised to be “23”, the
list will display as 1, 23, 3, 4, etc. and the original row 23 remains the same. We
recommend that the Group Number field NOT be revised.

2. Modify the text in the Group Name field to a meaningful means of grouping

keyboards. Once the group name is modified, the values will be carried over into
other applicable windows.

Heading

Group tab

Summary of Contents for VideoBloX





















































































































































































Search results

Summary of Contents for VideoBloX

Reviews:

Related manuals for VideoBloX

Brands by name

Popular brands

Honeywell VideoBloX, User Manual

Search results

Summary of Contents for VideoBloX

Reviews:

Related manuals for VideoBloX

Brands by name

Popular brands