Honeywell VideoBloX User Manual Download Page 73

Page: 73 / 180

Honeywell

Figure 3-11 Inputs – Group Names Configuration

Field Definitions

Field

Description

HEADING

Input Number

Number assigned to the video input being configured.
Carries over from Inputs Detail window.

Camera Name

Camera title associated with this video input as edited in the
Inputs Title tab.

Camera Short Name

Abbreviated camera title associated with this video input as
edited in the Inputs Title tab.

GROUP NUMBER

Number assigned to each inputs group.

GROUP NAME

Text entered to name/identify a particular inputs group.

Steps for Configuring Input Group Names

1. Select a group number to use. Do not edit the Group Number column.

2. Modify the text in the Group Name field to a meaningful means of grouping inputs.

Once the group name is modified, the values will be carried over into other applicable
windows.

3. Select

to save/download all information from the current page.

Heading

Group
names tab

Summary of Contents for VideoBloX





















































































































































































Search results

Summary of Contents for VideoBloX

Reviews:

Brands by name

Popular brands

Honeywell VideoBloX, User Manual

Search results

Summary of Contents for VideoBloX

Reviews:

Brands by name

Popular brands