Honeywell MX7 Tecton, Reference Manual

Page: 91 / 366

Message Explanation and/or corrective action Level
Exit password timeout Exiting password timeout processing.
LOG_PROC-
ESSING
Exit restart app timer Processing is at the end of the timer function
LOG_PROC-
ESSING
Exit TaskbarScreenMode Exiting the function that switches the screen mode back to normal operation for the administrator.
LOG_PROC-
ESSING
Exit ToAdmin Exiting the function that handles the mode switch into admin mode.
LOG_PROC-
ESSING
Exit ToUser Exiting the user mode switch function.
LOG_PROC-
ESSING
Exit ToUser-Registry read
failure
The AppName value does not exist in the registry so user mode cannot be entered.
LOG_PROC-
ESSING
Exit verify password-no
pwd set
Exiting password verification.
LOG_PROC-
ESSING
Exit verify password-
response from dialog
Exiting password verification.
LOG_PROC-
ESSING
Found taskbar The handle to the taskbar has been found so that AppLock can disable it in user mode.
LOG_PROC-
ESSING
Getting address of key-
board hook init procedure
AppLock is retrieving the address of the keyboard hook.
LOG_PROC-
ESSING
Getting configuration from
registry
The AppLock configuration is being read from the registry. This occurs at initialization and also at entry into
user mode. The registry must be re-read at entry into user mode in case the administration changed the set-
tings of the application being controlled.
LOG_PROC-
ESSING
Getting encrypt pwd
length
The length of the encrypted password is being calculated. LOG_EX
Hook wndproc failure
AppLock is unable to lock the application. This could happen if the application being locked encountered an
error after performing its initialization and shut itself down prior to being locked by AppLock.
LOG_ERROR
Hook wndproc of open
app failure
The application is open, but AppLock cannot lock it. LOG_ERROR
Hot key event creation fail-
ure
The Admin applet is unable to create the hotkey notification. LOG_ERROR
Hot key pressed Processing the hotkey and backdoor entry LOG_EX
Hot key pressed Processing the hotkey and backdoor entry LOG_EX
Hot key set event failure
When the administrator changes the hotkey configuration the hotkey controller must be notified. This noti-
fication failed.
LOG_ERROR
Hotkey press message
received
The user just pressed the configured hotkey.
LOG_PROC-
ESSING
In app hook:WM_SIZE
In addition to preventing the locked application from exiting, AppLock must also prevent the application from
enabling the taskbar and resizing the application’s window. This message traps a change in the window size
and corrects it.
LOG_EX
In app hook:WM_WIN-
DOWPOSCHANGED
In addition to preventing the locked application from exiting, AppLock must also prevent the application from
enabling the taskbar and resizing the application’s window. This message traps a change in the window posi-
tion and corrects it.
LOG_EX
Initializing keyboard hook
procedure
AppLock is calling the keyboard hook initialization.
LOG_PROC-
ESSING
Keyboard hook initial-
ization failure
The keyboard filter initialization failed. LOG_ERROR
4-53