Honeywell MX7 Tecton Reference Manual Download

Page: 116 / 366

Certificates

Start > Settings > Control Panel > Certificates

Manage digital certificates used for secure communication.

Note:

Digital certificates are date sensitive. If the date on the MX7 Tecton is incorrect, wireless authentication will fail.

The Certificates stores lists the certificates trusted by the MX7 Tecton mobile device user.

These values may change based on the type of network security resident in the client, access point or the host system.

Tap the

Import

button to import a digital certificate file.

Tap the

View

button to view a highlighted digital certificate.

Tap the

Remove

button to remove highlighted certificate files.

Tap the ? button and follow the instructions in the Windows CE Help file when working with trusted authorities and digital
certificates.

4-78

Summary of Contents for MX7 Tecton















































































































































































































































































































































































Search results

Summary of Contents for MX7 Tecton

Reviews:

Related manuals for MX7 Tecton

Brands by name

Popular brands

Honeywell MX7 Tecton, Reference Manual

Search results

Summary of Contents for MX7 Tecton

Reviews:

Related manuals for MX7 Tecton

Brands by name

Popular brands