Honeywell MX7 Tecton Reference Manual Download

Page: 205 / 366

Peripherals

Start > Settings > Control Panel > Peripherals

This panel is used to enable and disable the touch screen and scan window heaters.

Factory Default Settings

Heaters

Touch screen heater

Enabled

Scan window heater

Enabled

Heater trip point

0 degrees C

Heaters

Note:

Settings have no effect if the touch screen / scan window heaters are not installed.

Click the radio button to enable or disable the heaters.

The default

heater trip point

is 40° C / 100° F. Choose a different trip point from the drop down list and click OK. The change is

in effect immediately.

4-167

Summary of Contents for MX7 Tecton















































































































































































































































































































































































Search results

Summary of Contents for MX7 Tecton

Reviews:

Related manuals for MX7 Tecton

Brands by name

Popular brands

Honeywell MX7 Tecton, Reference Manual

Search results

Summary of Contents for MX7 Tecton

Reviews:

Related manuals for MX7 Tecton

Brands by name

Popular brands