Honeywell MX7 Tecton, Reference Manual

Page: 156 / 366

Parameters
Name text box
Name is the descriptor that is used to identify the custom Code ID. Names must be unique from each other; however, the
Name and ID Code may have the same value. Name is used in the Symbology drop down box to identify the custom Code ID
in a user-friendly manner. Both Name and ID Code must be specified in order to add a custom Code ID to the Custom IDs list.
ID Code text box
ID Code defines the data at the beginning of a bar code that acts as an identifier (the actual Code ID). Both Name and ID Code
must be specified in order to add a custom Code ID to the Custom IDs list.
Buttons
Add
Entering data into both the Name and ID Code fields enables the Add button. Click the Add button and the data is added to the
next empty location in the Custom ID list.
Insert
Click on an empty line in the Custom ID list. The Add button changes to Insert. Enter data into both the Name and ID Code
fields and click the Insert button. The data is added to the selected line in the Custom IDs list.
Edit
Double click on the item to edit. Its values are copied to the text boxes for editing. The Add button changes to Replace. When
Replace is clicked, the values for the current item in the list are updated.
Clear All
When no item in the Custom IDs list is selected, clicking the Clear All button clears the Custom ID list and any text written
(and not yet added or inserted) in the Name and ID Code text boxes.
Remove
The Clear All button text changes to a Remove button when an item in the Custom IDs list is selected. Click the desired line
item and then click the Remove button to delete it. Line items are Removed one at a time. Contents of the text box fields are
cleared at the same time.
4-118