Honeywell Experion PKS Series A, User Manual, Page: 229 / 560

5. Configuration
5.6. Configuring Advanced Alarming
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 229
July 2010 Honeywell
Step Action
respectively.
From the Alarm Criticality tab, select the appropriate criticality for the
condition.
5
From the Priority tab, select the appropriate priority for the condition.
ATTENTION
Each condition is configured with a priority, which manages
the condition reported to Experion system.
A condition can generate a Journal event only or an alarm with
low, high or urgent priority.
6
From the FF Conditions , select the appropriate check box to choose the
parameters.
The selection of parameters is based on the Parameter Reference selection.
To select a parameter/multiple parameters for a condition:
a) Select a parameter from the list and the list of available bits are
available.
b) Select one or more bits from the list, the summary of all the selections for
the condition appears as a tree view.
ATTENTION
It is highly recommended that you must select only a single
parameter bit for each condition to easily identify the cause of
the alarm that is generated and to identify the bit transition in the
alarm and event summary.
You must enter an appropriate condition name to reflect the
failure mode of the selected bitstrings.
You must select the appropriate bits from one or more device
parameters.
To clear the selected parameters/bits from the available list,
clear the check box.
Click Clear to clear all the selected options or clear the check
box to clear the selected parameters/bits from the available list.
A message appears displaying the information to clear all the
configuration information selected for the condition. Click
Yes to
continue.