CM4 Four-Point Continuous Monitor
CM4 Technical Manual
6-8
The display reads:
1 = DISPLAY 2 = PRINT
3. Press 1 to display the customer data. Press 1 again to alternate
between the two lines of customer data.
ABC MANUFACTURING
CHICAGO, ILL
Press RESET to return to the Review Menu
6.7 Function 2.6 – Print Configuration
Purpose
Use the Print Configuration function to print the preprogrammed
system configuration, including:
• Serial number
• Customer name and location
• Date and time
• All configuration information
See
for a typical printout.
The CM4 only prints the data. Data is not displayed.
Instructions
1. Press PROGRAM to exit Monitor Mode.
2. From the 2–REVIEW MENU, choose the subfunction 6–PRINT
CONFIGURATION.
2 – REVIEW MODE
6 – PRINT CONFIG
Use the Set-Up Menu to change any configurable parameters shown
on the printout (see
).
The CM4 prints the system configuration information, shown on the
sample printout in
.
6.8 Function 2.7 – Instrument Serial Number
Purpose
Use the Instrument Serial Number function to display the CM4 serial
number. Being able to display the instrument serial number avoids the
necessity of looking behind the instrument to retrieve the serial number
when placing a call to Honeywell Analytics for information or service.
It is always a good idea to write the serial number and file it for future
reference. This information appears in TWA and other printouts.
Instructions
1. Press PROGRAM to exit Monitor Mode.
2. From the 2–REVIEW MENU, choose the subfunction
7–INSTRUMENT SERIAL NUMBER.
2 – REVIEW MODE
7 – INST SER NUMBER
The display shows the instrument serial number:
SERIAL #851-0000
Press RESET to return to the Review Menu.
For the CM4-P, the letter “P” replaces the hyphen used in standard
CM4 serial numbers, i.e. 851P000X for a CM4-P instrument, and
851-000X is a standard CM4 serial number. This designation appears
on all printouts, point IDs, and displays in which the instrument
identification is used.
珠海司福斯特科技有限公司
www.safedtech.com
