CM4 Four-Point Continuous Monitor
CM4 Technical Manual
6-7
6.5.2 Display Last Power-Down
Purpose
The display last power-down function displays the same information
for the last power-down as is sent to the printer, described in the
previous section.
Instructions
1. Press PROGRAM to exit Monitor Mode.
2. From the 2–REVIEW MENU, choose the subfunction 4–LAST
POWER DOWN.
2 – REVIEW MODE
4 – LAST POWER DOWN
The display reads:
1 = DISPLAY 2 = PRINT
3. Press 1 to display the last power-down information.
PWRDN 05/26/05 10:15
PWRUP 06/01/05 07:30
The display alternates the power-down/power-up messages until
RESET is pressed.
6.6 Function 2.5 – Customer Data
Use the customer data function to print and display information about
the customer. Honeywell Analytics programs and stores the customer
name and location in the CM4. This information is included in TWA
and other printouts.
6.6.1 Print Customer Data
Purpose
The CM4 prints the following customer information:
• Name
• Location
Instructions
1. Press PROGRAM to exit Monitor Mode.
2. From the 2–REVIEW MENU, choose the subfunction
5–CUSTOMER DATA.
2 – REVIEW MODE
5 – CUSTOMER DATA
The display reads:
1=DISPLAY 2=PRINT
3. Press 2 to print the customer name and location.
6.6.2 Display Customer Data
Purpose
Use the Display Customer Data function to display the same
information about the customer as is sent to the printer, described in
the previous section.
Instructions
1. Press PROGRAM to exit Monitor Mode.
2. From the 2–REVIEW MENU, choose the subfunction
5–CUSTOMER DATA.
2 – REVIEW MODE
5 – CUSTOMER DATA
珠海司福斯特科技有限公司
www.safedtech.com
