Honeywell 3-144, Programming Manual

Page: 151 / 214

Galaxy 3 Series Programming Manual
145
2 = B-key
The programming of the B key is identical to that of the A key.
3 = Buzzer Mimic
This option determines whether the keypad buzzer mimics the function of the programmed keypad output
(refer to option
53 = PROGRAM OUTPUTS ). The default function of the keypad output is Entry/Exit
Horn and the default Mimic defaults to On , therefore the keypad buzzer operates as an Entry/Exit Horn at
factory setting.
To disable the keypad buzzer from mimicking the output select 0 = Off .
4 = Backlighting
This option determines when the keypad backlighting switches on and off.
0 = always off,
1 = always on (default),
2 = on when the system is unset;
off when the system is set;
switches on when the keys are pressed,
3 = on during setting and unsetting;
switches on when keys are pressed;
switches off after keypad timeout and when menu is exited,
4 = switches on when keys are pressed;
switches off after keypad timeout and when menu is exited.
5 = Keypad Mute
This option allows the bleep which normally accompanies a valid keypress to be disabled. This features
improves security and reduces tampering with the keypad when it is located in a public place.
When the Mute option is set to 1 = On , whenever the keypad banner is displayed the keypresses are silent,
there are no s displayed as each key is pressed and the keypad backlighting remains off. As soon as a valid
code is entered the keypad returns to normal operation - the keys are accompanied by bleeps and the
backlighting switched on. The
Mute option defaults to disabled ( 0 = Off ).
Keypad Disable
A keypad may be disabled by programming the address of the keypad as a link destination (refer to menu
option
54 - Links ). When the source of the link is activated the keypad does not respond to any keypress,
however, the LCD, keypad buzzer and any keypad output device acts as normal.
58 - Keypad (cont’d)