Galaxy 3 Series Programming Manual
29
Table 4. Default Codes
* The authorization code is a secondary system manager code but is not programmed by default.
Engineer Code
•
Engineer access is enabled via menu 48.1. This menu is only available to type 3.6 users.
•
The engineer code can only modify the engineer PIN.
•
The engineer code cannot assign, modify or delete the manager or user codes;
•
On accessing engineering mode, any group that is set becomes inaccessible to the engineer. The
set groups cannot be assigned to zones, outputs and any other functions permitting group
allocation;
•
While engineer mode is accessed, all tampers are disabled, however, all constantly alert zone
types —
PA
zone types,
24 Hour
,
Security
,
Fire
— remain active.
•
The engineer banner is shown on all keypads while engineer mode is being accessed; the
message
ENGINEER MODE
is displayed;
Entry to the engineer mode
must be
authorized by a valid type 3.6 user (refer to option
48 = ACCESS
AUTHORIZATION
). The engineer code must then be entered within five minutes of the option being ena-
bled. A single entry of the engineer code directly accesses engineer mode, without activating an engineer
tamper alarm;
ENGINEER MODE
is displayed on the keypad. If the engineer code is not entered within
the five minute period, the code is invalid and an
Insufficient Access Rights
message is displayed on the
keypad. Once the engineer mode has been accessed, there is no time limit on the period that the engineer can
remain in the mode.
NOTE:
Dual entry of the engineer code in a system requiring user authorization does not give access to
engineer mode.
ATM User Codes
ATM ( Automatic Teller Machine) user codes work in conjunction with ATM zone types (refer to Menu
Option
52.48-51=Program Zones ATM1-4
). ATM user codes cannot be used as normal user codes for
setting/unsetting etc. The following table shows the number of the users for each Galaxy variant:
Default Codes
The Galaxy system provides four default codes: Manager, Engineer, Remote and Authorization User. Refer to
the following table:
42 - Codes (cont’d)
Galaxy
No. of Codes
Manager
Engineer
Remote
Authorization*
Default PIN
User No.
Default PIN
User No.
Default PIN
User No.
Default PIN
User No.
3-48
100
12345
98
112233
99
543210
100
-
97
3-144
250
12345
248
112233
249
543210
250
-
247
3-520
999
12345
997
112233
998
543210
999
-
996
Table 5. ATM User codes
Galaxy Variant
User codes
3-48
94 to 96
3-144
242 to 246
3-520
986 to 995
Summary of Contents for 3-144
