![Honda CG150 Job Owner'S Manual Download Page 213](http://html.mh-extra.com/html/honda/cg150-job/cg150-job_owners-manual_2157169213.webp)
Owner’s Manual
98
6. Wash and dry the motorcycle. Protect all painted
surfaces by applying silicon-based wax. Apply rust-
inhibiting spray to the wheel rims, forks and shock
absorbers, exhaust pipe (including inner surface)
and other chromed components.
NOTE
Apply rust-inhibiting spray only with the engine cold.
The excess can be removed after 24 hours.
7. Remove all excess of water and lubricate the control
cables.
8. Inflate the tires to the recommended pressure. Place
the motorcycle on blocks to raise both tires off the
ground.
9. Cover the motorcycle with an appropriate cover.
Do not use plastic covers or other impermeable
materials. Store it in a cool area, free of dampness
and with a minimum daily temperature variation.
Do not store the motorcycle in direct sunlight.
Removal from Storage
When the motorcycle is to be used again, follow the
procedures below:
1. Uncover and clean the motorcycle. Change the oil if
more than 4 months have passed since the start of
storage.
2. Slow charge the battery as required and install it.
3. Drain any excess of aerosol rust-inhibiting oil from
the fuel tank. Fill it with fresh gasoline.
4. Perform all Pre-ride Inspection checks. Test ride the
motorcycle at low speed in a safe riding area away
from traffic.
Charge the
battery.
Clean the inside of the fuel tank
and fill with fresh gasoline.
Change the
engine oil.
Use an appropriate cover.
(Illustration only for reference)
(Illustration only for reference)
Summary of Contents for CG150 Job
Page 1: ...CG150 Titan KS ES ESD CG150 Sport CG150 Job Manual del Propietario Owner s Manual ...
Page 6: ...Manual del Propietario 1 CG150 Titan KS ES CG150 Titan ESD CG150 Sport CG150 Job ...
Page 116: ...Owner s Manual 1 CG150 Titan KS ES CG150 Titan ESD CG150 Sport CG150 Job ...
Page 222: ...Printed in Brazil A0200 0502 D2203 MAN 0429 CG150 Titan KS ES ESD CG150 Sport CG150 Job ...