Honda CG150 Job, Owner'S Manual

Page: 161 / 222

Owner’s Manual 46
!
WARNING
4. TIRES – check pressure, tread wear and tire
condition (pages 33 to 37).
5. DRIVE CHAIN – check condition and slack (page
67). Adjust and lubricate if necessary.
6. THROTTLE – check for smooth opening and full
closing in all steering positions, proper cable routing
and throttle lever free play (page 66).
7. ELECTRICAL SYSTEM – check the headlight,
taillight, brake light, turn signals, indicators and
horn for proper operation.
Correct any abnormality before you ride. Contact your
authorized Honda dealer for assistance if you cannot
correct the problem.
If the Pre-ride Inspection is not performed, severe
personal injury or motorcycle damage may result.
Inspect your motorcycle every day before riding.
The inspection procedures below will only take a few
minutes, and in the long run they can save time,
expense and possibly your life. If any adjustment or
maintenance service is necessary, refer to the
appropriate section of this manual.
1. ENGINE OIL LEVEL – add engine oil if required
(page 32). Check for leaks.
2. FUEL LEVEL – fill fuel tank when necessary
(page 31). Check for leaks.
3. FRONT AND REAR BRAKES – check operation and
adjust the brake free play, if necessary. Check the
shoes for wear.
Only CG150 Titan ESD/CG150 Sport: check the
front brake pad for wear and make sure there is no
brake fluid leakage (pages 25 to 28 and 74).
OPERATION
Pre-ride Inspection